A/C System
WARNING: This page is about a different variant/trim than selected.
| Item | Specifications | |||
|---|---|---|---|---|
| Type of air conditioner | Reheat air-mix type | |||
| Cooling capacity | 5 kW (4, 299 kcal/h, 17, 059 BTU/h) or more | |||
| Refrigerant | HFO-1234yf (CH2 = CFCF3 ) [0.5±0.025 kg (1.10±0.06 lb)] | |||
| Compressor | Manual A/C model | Type | Scroll, fixed displacement (SCSA08H) | |
| Discharge | 74.5 cc (4.55 cu in)/rev | |||
| Max. permissible speed | 9, 000 r/min | |||
| Oil | Recommended materials: ND-OIL12 Capacity: 70 cm3 (4.27 cu in) | |||
| Auto A/C model | Type | Swash plate, variable capacity (TSE14F) | ||
| Discharge | 140.6 cc (8.58 cu in)/rev | |||
| Max. permissible speed m | 6, 000 r/min | |||
| Oil | Recommended materials: ND-OIL12 Capacity: 70 cm3 (4.27 cu in) | |||
| Magnet clutch (manual A/C model only) | Type | Dry, single-disc type | ||
| Power consumption | 35 W | |||
| Pulley | Type of belt | V-belt 6 PK | ||
| Pulley dia. (effective dia.) | Manual A/C model: 100 mm (3.94 in) Auto A/C model: 110 mm (4.33 in) |
|||
| Pulley ratio | Manual A/C model: 1.43 Auto A/C model: 1.3 | |||
| Condenser | Type | Corrugated fin (sub cool type) | ||
| Core face area | 0.214 m2 (2.304 sq ft) | |||
| Core thickness | 11.5 mm (0.45 in) | |||
| Radiation area | 4.694 m2 (50.53 sq ft) | |||
| Receiver drier | Effective inner capacity | 220 cm3 (13.42 cu in) | ||
| Expansion valve | Type | Block type | ||
| Evaporator | Type | Double tank | ||
| Size (width x height x thickness) | 279.7 x 191 x 38 mm (11.01 x 7.52 x 1.5 in) | |||
| Blower fan | Fan type | Sirocco fan | ||
| Size (outer diameter x height) | 137 x 60 mm (5.39 x 2.36 in) | |||
| Power consumption | 260 W or less | |||
| Condenser fan (sub fan) | Motor type | Magnet | ||
| Power consumption | 120 W | |||
| Fan outer diameter | 300 mm (11.8 in) | |||
| Radiator fan (main fan) | Motor type | Magnet | ||
| Power consumption | 120 W | |||
| Fan outer diameter | 300 mm (11.8 in) | |||
| Idle speed | MPFI model | 2.0 L model | No load | CVT model: 775±100 r/min MT model: 650±100 r/min |
| A/C ON | 800 - 900±50 r/min | |||
| 2.5 L model | No load | 675±100 r/min | ||
| A/C ON | 800 - 900±50 r/min | |||
| Pressure switch (triple pressure switch) | Low-pressure switch operating pressure | ON → OFF | 196±20 kPa (2±0.2 kgf/cm2 , 28.4±2.9 psi) | |
| (Manual A/C model only) | High-pressure switch operating pressure | OFF → ON | 225+25-29 kPa (2.29+0.25-0 .3 kgf/cm2 , 32.6+3 -6-4 .2 psi) | |
| ON → OFF | 3, 140 +50-200 kPa (32.02+0.51-2.04 kgf/cm2 , 455.4+7.2-29 psi) | |||
| OFF → ON | 2, 475 ±325 kPa (25.24±3.31 kgf/cm2 , 358.87±47.12 psi) | |||
| Middle-pressure switch operating pressure | ON → OFF | 1, 370 ±120 kPa (13.97±1.22 kgf/cm2 , 198.6±17.4 psi) | ||
| OFF → ON | 1, 770 ±80 kPa (18.05±0.82 kgf/cm2 , 256.6±11.6 psi) | |||