Manual A/C Model
WARNING: This page is about a different variant/trim than selected.
- Install the cable - mode and the cable - temperature.
- Install the panel assembly - heater.
- Install the heater control assembly.CAUTION: Install the heater control assembly so that each cable position and heater control assembly dial position are the same.
- Install the pocket assembly and the back panel - pocket. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>INSTALLATION .
- Install the audio assembly or navigation assembly. Ref. to ENTERTAINMENT & MONITORING>AUDIO>INSTALLATION .
- Install the grille assembly - CTR ventilation.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .