LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (HVAC System (Heater, Ventilator And A/C) (Except For HEV)) >> Control Panel >> Inspection >> Auto A/C Model

Auto A/C Model

WARNING: This page is about a different variant/trim than selected.
  1. Check the illumination operation when battery voltage is applied between the connector terminals.
    CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
    Incorrect polarity connection may cause LED damage inside the switch.
    G10270294Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    39 (+) - 29 (-) Apply battery voltage. Light ON
  2. If it does not operate normally, replace the heater control assembly.
scientia non olet · About LEMON Manuals