LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (HVAC System (Heater, Ventilator And A/C) (Except For HEV)) >> Compressor >> Inspection >> Manual A/C Model >> Check Magnet Clutch Clearance

Check Magnet Clutch Clearance

WARNING: This page is about a different variant/trim than selected.
  1. Check the clearance of entire circumference around the drive plate and pulley.

    Specification: 

    0.3 - 0.6 mm (0.0118 - 0.0236 in)

  2. Replace the compressor assembly if the inspection result is not within the standard.
scientia non olet · About LEMON Manuals