LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Emission Control Systems (Aux. Emission Control Devices) (Except For HEV)) >> Purge Control Solenoid Valve >> Inspection >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that the purge control solenoid valve has no deformation, cracks or other damages.
  2. Measure the resistance between the purge control solenoid valve terminals.
    G11252899Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Standard
    1 and 2 24.5 ± 1.5 Ω (when 20°C (68°F))
  3. Check that air does not come out from (B) when air is blown into (A).
    G11253039Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the battery positive terminal to the terminal No. 1 and the battery negative terminal to the terminal No. 2. Check that air is discharged from (B), when supplying air to (A).
    G11253040Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals