LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Emission Control Systems (Aux. Emission Control Devices) (Except For HEV)) >> PCV Connector >> Installation

PCV Connector: Installation

WARNING: This page is about a different variant/trim than selected.
  1. By using new O-rings, install the PCV connector, and connect water hose and PCV hose No. 2 to the PCV connector.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the A/C compressor. Ref. to AIR CONDITIONER (EXCEPT FOR HEV)>COMPRESSOR>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  4. Fill engine coolant. Ref. to COOLING (H4DO (EXCEPT FOR HEV))>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .
  5. Check refrigerant leaks. Ref. to AIR CONDITIONER (EXCEPT FOR HEV)>REFRIGERANT LEAK CHECK>INSPECTION .
scientia non olet · About LEMON Manuals