Section 19 (Emission Control Systems (Aux. Emission Control Devices) (Except For HEV)): Canister: Installation

WARNING: This page is about a different variant/trim than selected.

Install the canister bracket.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)
Connect the purge tube to the canister. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE D) .

Install the canister.

Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)

Impreza model

G11253029

Courtesy of SUBARU OF AMERICA, INC.

Crosstrek model

G13224135

Courtesy of SUBARU OF AMERICA, INC.

Connect the drain tube (A) and purge tube (B).
Drain tube:

Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE E) .

Purge tube:

Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE G) .
Connect the vent tube (C). Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE F) .

Courtesy of SUBARU OF AMERICA, INC.
Install the rear differential.
VA-type:

Ref. to DIFFERENTIALS>REAR DIFFERENTIAL (VA-TYPE)>INSTALLATION .

VB-type:

Ref. to DIFFERENTIALS>REAR DIFFERENTIAL (VB-TYPE)>INSTALLATION .