LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System (2.5L) (Diagnostics) (4 Of 4)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P26A5: Engine Coolant Bypass Valve "A" Position Sensor Circuit Range/Performance >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different variant/trim than selected.
Secondary parameters Execution condition
Battery voltage 10.9V or more
Engine coolant temperature when the ignition switch is OFF 8°C (46.4°F) or more
[{Ignition switch OFF thermo-control valve drive signal Open
|Thermo-control valve angle (n) - Thermo-control valve angle (n - 1)|} Less than 0.6°
Time described above] 1.2 sec or more
Or,
Battery voltage 10.9V or more
Engine coolant temperature when the ignition switch is OFF 8°C (46.4°F) or more
(Ignition switch OFF
Time described above) 60000 ms or more