Execution Condition
WARNING: This page is about a different variant/trim than selected.
Diagnosis 1
| Secondary parameters | Execution condition |
|---|---|
| Elapsed time after ignition switch is turned to ON | 500 ms or more and Less than 60000 ms |
| Soaking time | 60s or more |
| Vacuum pump in the leak check valve assembly | Not in operation |
| Switching valve in the leak check valve assembly | Open |
| Purge control | Not in operation |
Diagnosis 2
| Secondary parameters | Execution condition |
|---|---|
| Elapsed time after Auto Start Stop control | 5000 ms or more |
| Purge control | Not in operation |