Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 1)
| Malfunction Criteria | Threshold Value |
|---|---|
| Operating current | 0.2 A or less |
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 2)
| Malfunction Criteria | Threshold Value |
|---|---|
| Operating current | 32.4 A or more |
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 3)
| Malfunction Criteria | Threshold Value |
|---|---|
| Terminal voltage | 1 V or less |
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 4)
| Malfunction Criteria | Threshold Value |
|---|---|
| Terminal voltage | 5 V or more |
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 5)
| Malfunction Criteria | Threshold Value |
|---|---|
| Injector control voltage | Less than 3.92 V |
JUDGMENT VALUE SPECIFICATIONS (DIAGNOSIS 6)
| Malfunction Criteria | Threshold Value |
|---|---|
| Injector control voltage | 3.92 V or more |
Time needed for diagnosis:
Diagnosis 1, 2, 5: Map1
Diagnosis 3, 4, 6: Map2
ENGINE SPEED SPECIFICATIONS - MAP 1
| Engine speed (rpm) | 500 | 2000 | 4000 |
|---|---|---|---|
| Time when calculation was performed 10 times (sec) | 2.4 | 0.6 | 0.3 |
ENGINE SPEED SPECIFICATIONS - MAP 2
| Engine speed (rpm) | 0 | 500 | 2000 | 4000 |
|---|---|---|---|---|
| Time when calculation was performed 10 times (sec) | 0.04 | 2.4 | 0.6 | 0.3 |
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.