LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (CVT Transaxle (Tr580 CROSSTREK)) >> Turbine Speed Sensor >> Removal

Turbine Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION:

If water or oil contacts the connector terminal of turbine speed sensor, replace it with a new part. 

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>REMOVAL .
  3. Disconnect the connector and remove the turbine speed sensor.
    G13603183Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the O-ring from the turbine speed sensor.
scientia non olet · About LEMON Manuals