LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Manual Transaxle & Differential (6MT)) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the differential side retainers using the ST (WRENCH COMPL RETAINER).
  2. Install the taper roller bearing outer race to the transmission case.
  3. Install the front differential assembly.
    CAUTION: Make sure the oil seal lip is not folded.
    G08318991Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MAIN SHAFT ASSEMBLY>INSTALLATION .
  5. Install the drive pinion shaft assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>DRIVE PINION SHAFT ASSEMBLY>INSTALLATION .
  6. Install the transmission case. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>TRANSMISSION CASE>INSTALLATION .
  7. Install the transfer case together with the extension case assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>TRANSFER CASE AND EXTENSION CASE ASSEMBLY>INSTALLATION .
  8. Install the manual transmission assembly to the vehicle. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals