Section 13 (SUBARU Eyesight System (Driver Assist) (Diagnostics) (Except For HEV)): General Description: Caution: Eyesight

WARNING: This page is about a different variant/trim than selected.

Do not hold the camera unit of the stereo camera.
Do not touch the lens on the stereo camera.
Do not clean the lens of the stereo camera.
When cleaning the windshield glass, use care so that the glass cleaner, etc. does not come in contact with the lens of the stereo camera.
Do not make an impact or apply excessive force to the stereo camera.
Do not disassemble the stereo camera.
Do not change the installation position of the stereo camera or do not modify the surrounding structure.
If the stereo camera or windshield glass is removed or replaced, always adjust or check the stereo camera.
When lifting up the vehicle to rotate the tires, turn off the pre-crash function.
Stereo camera axis may be displaced even in a minor collision. Even if the EyeSight warning light is not illuminated, or the [Stereo Camera Temporary Stop] is not displayed on the multi information display, adjust the stereo camera.
When removing the stereo camera cover assembly, cover it with a copy paper or similar dust-free paper to avoid any interference to the camera lens, and tape the paper with masking tape while being careful not to let the adhesive surface contact the glass surface. Be sure to remove the paper after the procedure. Ref. to EYESIGHT>STEREO CAMERA>REMOVAL .