LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (SUBARU Eyesight System (Driver Assist) (Diagnostics) (Except For HEV)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC B281E: RAB Control Module

DTC B281E: RAB Control Module

WARNING: This page is about a different variant/trim than selected.

Detected when error occurs in sonar or RAB control module.

DTC detecting condition: 

Trouble symptom: 

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>GENERAL DESCRIPTION>CAUTION .
  1. CHECK DTCS (DETERMINING A FAILURE OF COOPERATIVE CONTROL UNIT)  .
    1. Turn the ignition switch to ON.
    2. Read the DTC of [EyeSight] using the Subaru Select Monitor. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC TROUBLE CODE (DTC) .

    Is DTC other than DTC B281E displayed?

    Yes:  Perform the diagnosis for DTC other than DTC B281E.

    No:  Check the Reverse Automatic Braking. Ref. to REVERSE AUTOMATIC BRAKING (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .