LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (M/T Clutch System) >> Release Bearing and Lever >> Inspection >> Release Bearing

Release Bearing

WARNING: This page is about a different variant/trim than selected.
CAUTION: Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.
  1. Check the bearing play by applying force to the bearing in the radial direction.

    Specification: 

    1.4 mm (0.055 in) or more

    G13937900Courtesy of SUBARU OF AMERICA, INC.
  2. While applying force to the bearing in the rotational direction, check the bearing for smooth rotation.
    G13937901Courtesy of SUBARU OF AMERICA, INC.
  3. Check for wear and damage at the bearing case surface in contact with the lever.
scientia non olet · About LEMON Manuals