LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (M/T Clutch System) >> General Diagnostic Table >> Inspection >> Diagnostic Diagram Of Clutch Drag

Diagnostic Diagram Of Clutch Drag

WARNING: This page is about a different variant/trim than selected.
  1. CHECK GEAR NOISE  .
    1. Start the engine.
    2. While idling the engine, step on the clutch pedal and quickly shift from neutral to reverse.

      Is there any abnormal noise from the transmission gear?

      Yes:  Go to  2.

      No:  Clutch is normal.

  2. CHECK GEAR NOISE  .

    Depress the clutch pedal at idle, and shift from neutral to reverse within 0.5 - 1.0 second.

    Is there any abnormal noise from the transmission gear?

    Yes:  Go to  3.

    No:  Inspect defective transmission or excessive clutch drag torque, pilot bearing, clutch disc, transmission and clutch disc hub spline.

  3. CHECK GEAR NOISE  .
    1. Depress the clutch pedal at idle, and shift from neutral to reverse within 0.5 - 1.0 second.
    2. While stepping on the clutch pedal, shift from neutral to reverse, reverse to neutral several times.

      Is there any abnormal noise from the transmission gear?

      Yes:  Inadequate clutch disengage. Inspect the clutch disc, clutch cover, clutch release, and clutch pedal free play.

      No:  Clutch and flywheel seizure. Inspect the clutch disc and the spline of the clutch disc hub.

scientia non olet · About LEMON Manuals