Inspection Mode F
WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Description & trouble part | Condition |
|---|---|---|
| P0705 | TRANSMISSION RANGE SENSOR "A" CIRCUIT (PRNDL INPUT) | - |
Diagnostic procedure:
- Start the engine.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>ALL READINESS DIAGNOSTIC CODE(S) .
- Depress the brake pedal and move the select lever to each range at an interval of five seconds.NOTE: Move the select lever in the following order: "P" → "R" → "N" → "D".
- Maintain the engine speed to 2, 000 rpm for five seconds or more.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>ALL READINESS DIAGNOSTIC CODE(S) .