LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Automatic Transaxle (Diagnostics) (IMPREZA)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P2746: Intermediate Shaft Speed Sensor "B" Circuit Range/Performance >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Secondary parameters Execution condition
Diagnosis 1 
12 V battery system voltage
9 V or more
Transmission range Drive or Reverse
(Measured turbine shaft speed/Measured secondary pulley shaft speed) 0.38 or more
and
2.68 or less
Diagnosis 2 
12 V battery system voltage
9 V or more
Transmission range Drive or Reverse
(Measured turbine shaft speed/Measured secondary pulley shaft speed) 0.38 or more
and
2.68 or less