LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Automatic Transaxle (Diagnostics) (IMPREZA)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0776: Pressure Control Solenoid "B" Performance/Stuck Off >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Secondary parameters Execution condition
Diagnosis 1 
12 V battery system voltage
10 V or more
Transmission range Drive
Measured turbine shaft speed 100 rpm or more
Measured primary pulley shaft speed 100 rpm or more
Commanded forward & reverse clutch pressure control solenoid current Less than 0.9 A
Engine speed 400 rpm or more
Diagnosis 2 
12 V battery system voltage
10 V or more
Transmission range Drive
Measured primary pulley shaft speed Less than 100 rpm
Commanded forward & reverse clutch pressure control solenoid current Less than 0.9 A
Accelerator pedal position (from ECM) Exceeds 6%
Engine speed 400 rpm or more