Execution Condition
WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| Secondary parameters | Execution condition |
|---|---|
| Phase 1 12 V battery system voltage |
10 V or more |
| Engine speed | At or more than rpm values in table below |
| Phase 2 Fail detected (P0867) |
TRUE |
| 12 V battery system voltage | 10 V or more |
| Ignition state | OFF |
| Measured turbine shaft speed | 400 rpm or less |
| Transmission fluid temperature | -20 degC or more |
TARGET LINE PRESSURE SPECIFICATIONS
| Target line pressure (kPa) | 0 | 500 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Engine speed (rpm) | 140 | 720 | 979 | 1125 | 1235 | 1450 | 1670 | 1929 | 2100 |