LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Automatic Transaxle (Diagnostics) (IMPREZA)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0717: Input/Turbine Shaft Speed Sensor "A" Circuit No Signal >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Secondary parameters Execution condition
12 V battery system voltage 10 V or more
Engine speed 400 rpm or more
Transmission range Drive or Reverse
Measured primary pulley shaft speed 500 rpm or more