LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Transmission Mounting System >> Installation >> Transmission Rear CROSSMEMBER And Rear Cushion Rubber

Transmission Rear CROSSMEMBER And Rear Cushion Rubber

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the rear cushion rubber to the transmission.

    Tightening torque:  40 N.m (4.1 kgf-m, 29.5 ft-lb)

    G11255538Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transmission rear crossmember.

    Tightening torque:  T1: 35 N.m (3.6 kgf-m, 25.8 ft-lb)

    T2: 75 N.m (7.6 kgf-m, 55.3 ft-lb)

    Fig 1: Transmission Rear Crossmember Nuts And Bolts (With Torque Specification)
    G11255542Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the transmission jack.
  4. Install the rear exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>REAR EXHAUST PIPE>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals