LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and warm up the engine.
  2. Depress the brake pedal, and shift the select lever to "D" range.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is  idling. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR>OPERATION .

    Standard  Approx. 0.8 V

  6. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is  stopped and the ignition switch is turned on. Ref. to TRANSMISSION (DIAGNOSTICS) (IMPREZA MODEL)>DATA MONITOR>OPERATION .

    Specification:  Approx. 0.5 V

scientia non olet · About LEMON Manuals