LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr580 IMPREZA)) >> Reverse Brake Assembly >> Disassembly

Reverse Brake Assembly: Disassembly

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the snap ring.
  2. Remove the retaining plate, drive plate, driven plate and dish plate.
    G10218834Courtesy of SUBARU OF AMERICA, INC.
  3. Compress the return spring using the ST to remove the snap ring.

    Preparation tool: 

    ST: COMPRESSOR SPECIAL TOOL (18762AA001)

    G10218835Courtesy of SUBARU OF AMERICA, INC.
  4. Using the ST, remove the snap ring and spring retainer.
    G08318035Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the return spring.
    G08318036Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the reverse brake piston by blowing compressed air intermittently from reverse brake housing hole.
    G10406582Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals