Transfer Driven Gear: Disassembly
WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Using the ST, remove the taper roller bearing (extension case side).
Preparation tool:
ST: REMOVER (498077000)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Using ST1 and ST2, remove the taper roller bearing (transfer case side).
Preparation tool:
ST1: REMOVER (498077000)
ST2: REMOVER (899864100)
 Courtesy of SUBARU OF AMERICA, INC.
|