LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Manual Transaxle & Differential (5MT)) >> Reverse Check Sleeve >> Assembly

Reverse Check Sleeve: Assembly

WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the return spring (1st-2nd), return spring cap, reverse accent shaft, reverse check cam, return spring (5th-Reverse) and reverse check spring.
    CAUTION: Be sure to insert the curved part of reverse check spring into the check cam groove.
    G13937397Courtesy of SUBARU OF AMERICA, INC.
  2. Hook the curved part of reverse check spring onto the reverse check plate.
  3. Rotate the cam so that the protrusion on the reverse check cam is located at the plate opening.
  4. While fixing the cam to that position, attach the reverse check plate to the reverse check sleeve, and secure with snap ring.
  5. Replace the O-ring with a new part, and insert it into the sleeve groove.
scientia non olet · About LEMON Manuals