Cowl Panel: Removal
- Remove the arm assembly - windshield wiper. Ref. to WIPER AND WASHER SYSTEMS>FRONT WIPER ARM>REMOVAL .
- Release the clips and claws, and then remove the cowl panel - on the left and right sides.CAUTION: Pulling with excessive force may damage the cowl panel - side. If it is difficult to remove, use a plastic remover or equivalent tool.
- Remove the cowl panel assembly.CAUTION:
- Before removing the cowl panel, use an air blower and nylon brush to sweep gravel from the lower area of the front side of the glass.
- When removing the clip from the cowl panel center, push the claw of the clip from both sides.
- Be careful not to apply excessive force when pulling the clip, as the clip may become damaged.
- If pushing the claw of the clip is difficult, turning the claw position will facilitate the operation.
- Disconnect the hose - windshield washer.
- Remove the clip.
- Remove the cowl panel assembly by pulling it out towards the front of the vehicle.
- Remove the nozzle - windshield washer and the hose - windshield washer as necessary. Ref. to WIPER AND WASHER SYSTEMS>FRONT WASHER NOZZLE AND HOSE>REMOVAL .