LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Removal >> Lock Assembly

Lock Assembly

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>REMOVAL .
  3. Remove the cover UPR - front.
    1. Remove the clips, and remove the cover UPR - front.
    G11253597Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the lock assembly - front hood.
    1. Disconnect the connector and the clip.
    2. Remove the cable - front hood (a) and the cable - safety (b).
      G13234325Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the bolts and clips, and remove the lock assembly - front hood.
      G13235066Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals