LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Rear Height Sensor >> Removal

Rear Height Sensor: Removal

CAUTION:
  • Always remove the sensor assembly - headlight beam leveler before removing any parts related to the suspension.
  • Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing so may cause sensor damage and malfunction.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the sensor assembly - headlight beam leveler.
    CAUTION: Do not disassemble the sensor and lever.
    1. Disconnect the connector.
    2. Remove the nuts, and remove the sensor assembly - headlight beam leveler.
      G11246006Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals