Engine Will Not Start

Probable cause:

The vehicle is in the Stolen Vehicle Recovery + state.

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION .

CHECK STOLEN VEHICLE RECOVERY + .
1. Turn the ignition switch to ON.
2. Using Subaru Select Monitor, check the following items with [Data Monitor] of [Body Control] for models without Keyless Access with Push Button Start, and with [Data Monitor] of [Keyless Access with Push Button Start] for models with Keyless Access with Push Button Start. Ref. to BODY CONTROL (DIAGNOSTICS)>DATA MONITOR . Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>DATA MONITOR .
- Body Control
  - Immobilizer Set Memory
- Keyless Access with Push Button Start
- Immobilizer Set Memory
Is [Set] displayed?

Yes: Have the customer contact the call center to release the lock.

No: Perform inspection according to the diagnosis of engine. Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.5)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE . Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.0 (EXCEPT FOR HEV))>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE . Ref. to ENGINE (DIAGNOSTICS) (H4DO(HEV))>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .