LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) And Turbocharger >> Air Cleaner Case >> Removal

Air Cleaner Case: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>Air Intake Duct>REMOVAL .
  3. Disconnect the connector (A) from the air flow and intake air temperature sensor.
  4. Loosen the clamp (B) of the turbo duct.
  5. Disengage the clip (C), and remove the air cleaner case (rear) and air cleaner element.
    G13198571Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the air cleaner case (front).
    NOTE: The protrusion of the air cleaner case (front) is inserted in the cushion of the air cleaner case bracket.
    G13862352Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the air cleaner case bracket (A) and the side frame bracket (B).
NOTE: Remove if necessary.
G13198573Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals