Check Second-Row Seat Belt Switch

Preparation tool: 

Circuit tester

1. Check the resistance between terminals using each buckle switch checking condition.
   • RH

     Terminal No.	Inspection conditions	Standard	Circuit
     2 - 1	Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
     2 - 1	Tongue plate detached	1 Ω or less

   • CTR (model with bench seat)

   Terminal No.	Inspection conditions	Standard	Circuit
   2 - 1	Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
   2 - 1	Tongue plate detached	1 Ω or less

   • LH

   Terminal No.	Inspection conditions	Standard	Circuit
   2 - 1	Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
   2 - 1	Tongue plate detached	1 Ω or less

2. Replace the belt assembly second INN if the inspection result is not within the standard.