LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Airbag Connector >> Procedure >> Passenger's Airbag Module (Variable Vent Hole) & Side Airbag Module

Passenger's Airbag Module (Variable Vent Hole) & Side Airbag Module

  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Pull the lock arm (a) one step while pushing.
    2. Holding outer part, pull it one step in the direction of arrow.
      G10276959Courtesy of SUBARU OF AMERICA, INC.
    3. Push the lock arm again.
    4. Holding outer part, pull it in the direction of arrow to disconnect the connector.
    G10276960Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

Holding the connector, push it in securely until a clicking sound is heard.

scientia non olet · About LEMON Manuals