LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Third Seat >> Removal

Third Seat: Removal

CAUTION:
  • Third-row seats are heavy. When removing and installing them, always work in a team of two or more persons.
  • Be careful not to damage the vehicle when taking out the seat from the vehicle.
  1. Disconnect the ground terminal from battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the floor mat side, floor mat center, and box sub-trunk assembly.
    G13200476Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Remove the clips for the backrest back side mat of the third seat.
    G13200477Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws, and then remove the cover bolt third front.
    G13201347Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the seating sensor connector.
  5. Remove the bolts, and remove the third-row seat assembly.
    CAUTION: Be careful not to damage the rear air conditioning system piping when taking out the seat from the vehicle.
    G13201348Courtesy of SUBARU OF AMERICA, INC.
    G13201349Courtesy of SUBARU OF AMERICA, INC.