LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Key Lock Cylinders >> Replacement >> Glove Box Lid

Glove Box Lid

  1. Remove the pocket COMPL.
    1. Remove the damper assembly.
    2. Release the stoppers and remove the pocket COMPL by pulling it toward you.
    G11246529Courtesy of SUBARU OF AMERICA, INC.
  2. Replace the key cylinder.
    1. Pull up the lock knob.
    2. Push out the key cylinder from the pocket COMPL while pressing in the metal plate.
    G08319275Courtesy of SUBARU OF AMERICA, INC.
  3. Install the pocket COMPL. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>INSTALLATION .
scientia non olet · About LEMON Manuals