Cruise Control Switch Is Not Turned To On. (Cruise Indicator Light Does Not Illuminate)
- PERFORM REAL TIME DIAGNOSIS
.
Check the input signal of cruise control system. Ref. to EYESIGHT (DIAGNOSTICS)>REAL-TIME DIAGNOSIS .
Is the check result OK?
Yes : Go to 3.
No : Go to 2.
- CHECK EyeSight STEERING SWITCH
.
Check EyeSight steering switch. Ref. to EYESIGHT (DIAGNOSTICS)>Diagnostics with Phenomenon>INSPECTION>CHECK EyeSight STEERING SWITCH .
Is the check result OK?
Yes : Go to 3.
No : Replace the EyeSight steering switch. Ref. to EyeSight>SWITCHES AND HARNESS .
- INSPECTION OF CRUISE INDICATOR
.
Check the CRUISE indicator. Ref. to EYESIGHT (DIAGNOSTICS)>Diagnostics with Phenomenon>INSPECTION>TEMPORARY STOP OF EYESIGHT .
Is the check result OK?
Yes : The circuit has returned to a normal condition at this time.
NOTE: In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.No : Repair or replace the faulty portion according to the inspection result.