LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Onyx Edition XT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Switches and Harness >> Removal >> Trip Reset Switch

Trip Reset Switch

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the ornament panel mid driver assembly. Refer to INSTRUMENTATION/DRIVER INFO>Combination Meter>REMOVAL .
  3. Release the claws, and remove the switch assembly meter.
    G13625464Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals