LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Intake System (Induction) And Turbocharger (2.4L)) >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the air cleaner element and install the air cleaner case (rear).
    CAUTION:
    • Be sure to use SUBARU genuine air cleaner element suitable to the engine type. Otherwise the engine performance may decrease.
    • Install the air cleaner element so that the printed surface is on the upper side.
    NOTE:
    • If any foreign matter is found in the air cleaner case, clean it.
    • Install by aligning the claws located on the bottom of the air cleaner case.