LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Seat Heater Unit >> Rear Seat

Rear Seat

CAUTION: Seat heater unit is integrated into the pad assembly.
  1. Prior to starting work, check the following precautions, Refer to SEATS>General Description>CAUTION .
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work, Refer to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the rear seat, Refer to SEATS>Rear Seat>REMOVAL .
  4. Remove the rear seat surface, Refer to SEATS>Rear Seat>DISASSEMBLY .