Inspection Using Can Diagnostic

Trouble causes:

Improper body integrated unit setting

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Refer to LAN SYSTEM (DIAGNOSTICS)>General Description>CAUTION .

CHECK BODY INTEGRATED UNIT REGISTRATION STATUS .
Check that settings of body integrated unit correspond to vehicle equipment. Refer to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

Does the vehicle equipment correspond to settings?

Yes: Go to 2.

No: Match the settings of the body integrated unit with the vehicle equipment.
CHECK BODY INTEGRATED UNIT CUSTOMIZE SETTING .
Check that settings of body integrated unit correspond to vehicle condition. Refer to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE .

Do the customize settings correspond to the vehicle condition?

Yes: Go to 3.

No: Match the settings of the body integrated unit with the vehicle condition.
CHECK FACTORY INITIAL SETTING OF BODY INTEGRATED UNIT .
Confirm [Factory initial setting] of body integrated unit registrations is [Market]. Refer to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

Is it set to [Market]?

Yes: Go to step 4 in the Basic Diagnostic Procedure. Refer to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure>PROCEDURE .

No: Switch from [Factory] to [Market].