LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Premium >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Switches And Harness >> Removal >> Trip Reset Switch

Trip Reset Switch

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the visor assembly. Refer to INSTRUMENTATION/DRIVER INFO>COMBINATION METER>REMOVAL .
  4. Remove the switch assembly meter.
    1. Release the claws, and remove the switch meter.
    G13226698Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals