LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Forester Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Driver Monitoring Unit >> Removal

Driver Monitoring Unit: Removal

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Refer to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE .
  3. Remove the panel center UPR, and remove the audio assembly or navigation assembly. Refer to ENTERTAINMENT & MONITORING>AUDIO>REMOVAL .
  4. Remove the multi-function display. Refer to INSTRUMENTATION/DRIVER INFO>MULTI-FUNCTION DISPLAY (MFD)>REMOVAL .
  5. Remove the driver monitoring unit.
    CAUTION: Be careful not to damage the driver monitoring unit.
    1. Disconnect the claws and then remove the panel display LWR.
      G13226696Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the screws and clips to remove the driver monitoring unit.
    CAUTION: Do not disconnect the connector on the driver monitoring unit.
    G13226697Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals