Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Diagnosis 1 (Measured primary pulley shaft speed/Measured secondary pulley shaft speed) |
Less than 0.320 or More than 3.184 |
| Diagnosis 2 Measured primary pulley shaft speed |
Exceeds 7140 rpm |
Time needed for diagnosis : 5 s
Malfunction indicator light illumination : Illuminates as soon as a malfunction occurs.