Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | ||
|---|---|---|---|
| Signal of malfunction from solenoid driver IC(1) As defined by: Measured Oil Pump Control ON/OFF solenoid voltage, 2.5 V or more |
ON | ||
|
|||
Time needed for diagnosis : 0.2 s
Malfunction indicator light illumination : Illuminates as soon as a malfunction occurs.