DTC P0801: Reverse Inhibit Control Circuit/Open

WARNING: This page is about a different variant/trim than selected.

DTC detecting condition:

Immediately at fault recognition

CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS) (CROSSTREK MODEL)>BASIC DIAGNOSTIC PROCEDURE .

NOTE: For diagnostic procedures, refer to "DTC B1016 SHIFT LOCK CIRCUIT" in "BODY CONTROL SYSTEM (DIAGNOSTICS)". Ref. to BODY CONTROLS DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1016 SHIFT LOCK CIRCUIT .