LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Transaxle (Diagnostics) (CROSSTREK)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0752: Shift Solenoid "A" Stuck On >> General Description >> Execution Condition

Execution Condition

WARNING: This page is about a different variant/trim than selected.
Secondary parameters Execution condition
12 V battery system voltage
Engine speed
Commanded duty of shift up pressure control solenoid
Actual pulley ratio(1)
10 V or more
1000 rpm or more
0%
Less than 0.5
(1) Actual pulley ratio: Measured primary pulley shaft speed/Measured secondary pulley shaft speed