Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | ||
|---|---|---|---|
| ABS(1) (Target primary pulley shaft speed - Measured primary pulley shaft speed) (Commanded duty of shift up pressure control solenoid) or Commanded duty of shift down pressure control solenoid) |
600 rpm or more 90% or more 90% or more |
||
|
|||
Time needed for diagnosis : 5 s
Malfunction indicator light illumination : Illuminates as soon as a malfunction occurs.