LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (LAN Communication System (Diagnostics) (HEV)) >> CAN Communication Circuit Check >> Inspection >> Related Lines, More Than 52 Ω And Less Than 62 Ω (Main-Can_Stereo Camera)

Related Lines, More Than 52 Ω And Less Than 62 Ω (Main-Can_Stereo Camera)

WARNING: This page is about a different variant/trim than selected.

Wiring diagram: 

CAN communication system Ref. to WIRING SYSTEM (CROSSTREK MODEL (HEV))>CAN COMMUNICATION SYSTEM>WIRING DIAGRAM .

G13617035Courtesy of SUBARU OF AMERICA, INC.
G13617036Courtesy of SUBARU OF AMERICA, INC.
  1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS  .
    1. Disconnect the stereo camera connector.
    2. Using a tester, measure the resistance between terminals in stereo camera connector.

      Connector & terminal 

      (R137) No. 1 - (R137) No. 2:

    Is the resistance 400 Ω or more?

    Yes  : A related line between stereo camera and main wiring harness is open, or main wiring harness is open at two places or more.

    No  : Go to  2.

  2. CHECK RELATED LINES  .
    1. Disconnect the steering sensor connector.
    2. Using a tester, measure the resistance between stereo camera connector and steering sensor connector.

      Connector & terminal 

      (R137) No. 1 - (i74) No. 3:

      (R137) No. 2 - (i74) No. 2:

    Is the resistance 10 Ω or more?

    Yes  : Repair or replace the open circuit of stereo camera related lines.

    No  : Check DTC of stereo camera. Ref. to EYESIGHT (DIAGNOSTICS) (HEV)>DIAGNOSTIC TROUBLE CODE (DTC) .