LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (CVT Transaxle (Th2A)) >> CVTF Cooler Pipe and Hose >> Removal >> CVTF Inlet Pipe And CVTF Outlet Pipe

CVTF Inlet Pipe And CVTF Outlet Pipe

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Vehicle components are extremely hot immediately after driving. Be wary of receiving burns from heated parts.
  • If ATF spills over the engine, completely wipe it off to avoid emission of smoke and causing a fire.
  1. Disconnect the ground terminal from battery. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Drain the ATF. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TH2A)>AUTOMATIC TRANSMISSION FLUID>REPLACEMENT .
  3. Remove the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>REMOVAL .
  4. Remove the CVTF CVT inlet hose and CVTF CVT outlet hose.
    G13233141Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the clips, and remove the bolts which fasten the CVTF inlet pipe and CVTF outlet pipe.
    G13233243Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the union bolts and remove the CVTF inlet pipe and CVTF outlet pipe.
    G13233244Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals