LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) >> Satellite Safing Sensor >> Removal

Satellite Safing Sensor: Removal

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground terminal from the 12V engine restart battery sensor. and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  3. Remove the rear seat cushion assembly. Refer to SEATS>REAR SEAT>REMOVAL .
  4. Remove the satellite safing sensor.
    1. Remove the clip, and remove the cover - satellite safing.
    2. Remove the bolts and then remove the satellite safing sensor. Refer to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>FRONT SUB SENSOR AND SATELLITE SAFING SENSOR .
G08316418Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals